HPLC Valve and Injector Accessories

MilliporeSigma™ Supelco™ Micro-Mixer Static Mixers (2 to 25 μL) Housing, In-Line

MilliporeSigma™ Supelco™ Low Volume Static Mixer (50 to 250 μL) Housing, Binary

MilliporeSigma™ Supelco™ RheBuild™ Kit

Kits include all of the tools and parts you need to repair your SupelPRO unit. The parts included are those most likely to be damaged, worn, or lost. Parts may vary, depending on valve model.

MilliporeSigma™ Supelco™ Miniature Regulator with Gauge

Reliable pressure regulation to 1 psig (0.07 kg/cm²), indicated on a 0-60 psi (4.2 kg/cm²) gauge. Easily connects to SCOTTY 14 cylinders with the 1/8-inch NPT connector provided. You can also attach the syringe adapter (Cat. No. 609010) to the regulator for low pressure sample removal. Aluminum body with acetyl resin bonnet. Maximum inlet pressure: 400 psi (28.1 kg/cm²).

MilliporeSigma™ Supelco™ Reservoir for Filtration Apparatus 1

Replacement glass reservoir for Supelco™ mobile phase filtration apparatus 1

MilliporeSigma™ Supelco™ OPTI-SEAL Pump Seal

OPTI-SEAL pump seals are made from an inert, ultra-high molecular weight polyethylene material (UHMW-PE). Relative to conventional polytetrafluoroethylene (PTFE) seals, these seals show less particle shedding. This reduces the potential for clogged frits, resulting in the prevention of unscheduled system downtime.

MilliporeSigma™ Supelco™ Rheodyne™ Model 7010 Injector

Number of ports: 6 and Number of positions: 2

MilliporeSigma™ Supelco™ Micro-Mixer Static Mixers (2 to 25 μL) Housing, Binary

MilliporeSigma™ Supelco™ Rheodyne™ Injector, Rheodyne™, 7725i

Internal position sensing switch, Manual, Number of ports: 6 and Number of positions: 2

MilliporeSigma™ Supelco™ Rheodyne™ Stator

MilliporeSigma™ Supelco™ Rheodyne™ Stator Face Assy

MilliporeSigma™ Supelco™ OPTI-SOLV™ Mini, Micro, and Nano Filter

The OPTI-SOLV™ Mini Filter provides low-impact filtering in a package no longer that a finger tight fitting. Use them to prolong the life of your analytical column, or before your mass spectrometer as a last line of defense against debris.

MilliporeSigma™ Supelco™ Rheodyne™ Rotor Seal for Model 7125/7725/7725i Injector

Rotor Seal for Model 7125/7725/7725i Injector is an accessory for use with mainly Rheodyne™ model 7725 and 7725i injectors for operation at pH 0-14.

MilliporeSigma™ Supelco™ Hydrocarbon Kit acc. to DIN EN 14039/ISO 16703

Kit contains:

• mineral oil standard for calibration 8 mg/ml in heptane
• alkane standard solution
• heptane
• standard solution for the determination of the retention time
• Florisil™ tubes

MilliporeSigma™ Supelco™ Sample Diffusion Discs for LC columns

A 20 μm polyethylene disc sealed to an acrylic ring. Installed on top of column packing in an open-ended column, it protects the packing from disruption.